-
110kV~220kV Oil-immersed Power Transformer
1.High pressure transformer, use Japanese Toshiba analysis software and our company special calculation and validation procedures to the transformer core, winding, implement body, lead, fuel tanks, etc, Parts of the optimal design and carry on the omni – directional validation, ensure product performance. Superior process equipment, elaborate material selecting and efficient manufacturing.making the transformer has small volume, light weight, low loss, low partial discharge, low noise characteristics, the product quality is superior, energy conservation and environmental protection, easy installation and maintenance, reliable operation and effectively reduced products running costs.
-
SG(B)10~18 Un-packede H Grede Dry Transformer
SGB10 series the encapsulation H level dry type transformer adopt (Germany) MORA dry type transformer special technology, make products fully meet the fire waterproof and meet the requirements of environment protection. It is the ideal product distribution system, widely used in the subway, ships, mining, chemical, electric power enterprise and staff of dense buildings, etc. Various kinds of fire safety have special requirements occasion.
-
Sg Sold Winding Iron Core Transformer
The product has the following features: good insulation properties, high mechanical strength, moisture resistant, pollution-free, easy to install, and almost no need for maintenance. Can be applied for high rise buildings, wind power generation, solar energy, hospital, hotel, tunnel, station, wharf, airport, subway, petroleum, chemical industry, laboratory, combined power plant, shopping mall and other important places etc.
-
Scb Solid Winding Iron Core Transformer
The product has the following features: good insulation properties, high mechanical strength, moisture resistant, pollution-free, easy to install, and almost no need for maintenance. Can be applied for high rise buildings, wind power generation, solar energy, hospital, hotel, tunnel, station, wharf, airport, subway, petroleum, chemical industry, laboratory, combined power plant, shopping mall and other important places etc.
-
SCB10, SCB11, SCB12, SCB13, SCB14, SCB18 Epoxy-resin Insulation Dry-type Transformer
Security, flame retardant fire prevention, no pollution, can directly mounted in load center.
Maintenance free, easy installation, integrated operation cost is low. -
SCZB10~18 Load Voltage Dry-type Power Transformer
Solar PV for dry-type transformers can be divided into 10kV and 35kV grade product.
Moderate voltage 10kV products, easier to handle, therefore I am companies in the production of insulation structure in accordance with the traditional double-winding two-Division structure design, low voltage winding axial split the two groups, two sets of high-tension coil axially arranged, pouring two coils when pouring into a coil, two sets of coils on the electrical shunt unified lead-out.
-
SC(B)H15(17-19) non-crystalizing alloy dry-type transformer
The amorphous alloy dry type transformer is the the most advanced energy-saving dry type transformer of modern times.The product has the advantages such as low no-load loss,oil free,flame retardant from extinguish,moisture resistance,crack resistance and maintenance free.AII using ordinary dry places now can be get placed by amorphous alloy dry type transformer.which may be used in high-rise buildings, commercial center, subway, airport, station, industrial and mining enterprises and power plants,especially for flammable or explosive environment.
-
CSD transformers
Ships away from land;
Temperature：-25~45tC, the frequency 50~60Hz;
Air relative humidity is not more than 95%;
Condensation, influence of salt spray and mold;
Vibration and impact generated when the normal operation of ships;
Ship running swing angle of 22.5 °, tilt angle of 15 °;
-
Three Dimensional Volume Core
Power transformer is widely used as the basic power product. In the past decades, China and all over the world have been using plug – in power transformer for a long time, whose features are not improved fundamentality. The S13-M-RL、S11-M-RL series solid triangle iron core power transformers developed by our company are another revolutionary transformer after plug-in and winding iron core transformers. It is a kind of transformer that has more reasonable structure, better performance and more energy saving.
-
SZ11~20 35kV Low-loss And On-load Regulation Transformer
This product conform to the state standards GBI094 ” Power transformer” and CB /T6451 the three-phase oil-immersed power transformer technical parameters and requirements” .This product scope of on-load changer for 30 ± 4 x 2.5%kV; 35 ± 3 x 2.5%kV per cent in a side, kV on-load changer swilch by pressure regulating range in manual and electric or automatic adjusting voltage, to ensure that the output voltage stability.Therefore.it is widely applied to high voltage quality requirements of scientific research,buildings, hotels, enterprises and institutions. This product is the updated products, with better run economic benefits.
-
S11~S13 10kV-35 kV Low-loss And Non-exciting Regutation Power Transformer
This product implements national stangards GB1094-1996 the power transformer “and GB/T6451-2008 the three-phase oil- immersed power transformer technical parameters and requirements” .
S11 series transformer is the latest series of low loss copper windings products,the products using high-quality materials, in coil implement body and insulation,using new craft, new material, thus made racing, load loss reduced significantly, and performance and structure more reliable and superior.
-
S11(13)-M.ZT Distribution transformer on-load automatic tuning capacitor
This product is fit for on-load automatic capacity distribution transformer voltage regulator rated frequency 50Hz, voltage class 1okv, three-phase rated capacity 100(30)kVA – 630(200)kVA.
